Product Description
Brief introduction:
FM-1200BN Automatic Film Laminating Machine With Flying Knife
Glue laminating/ Thermal laminating PET/PVC/BOPP/CCP/Metallized film/Soft touched film…..
Product Parameters
| Max. sheet size |
760*760mm |
| Min. sheet size |
260*260mm |
| Paper thickness |
80-500Gsm |
| Height of feeding pile |
1060mm |
| Height of stacker pile |
1060mm |
| Machine speed |
65m/min |
| Working speed |
50-60m/min |
| Machine power |
55kw |
| Working power |
20-25kw/h |
| Dimension of machine |
L9000xW2800xH3000mm |
| Machine weight |
7500kg |
mmn technical parameters
Configuration & Functions
1.Automatic Feeder: Adopts offset feeder with advanced side lay, which fastest can feed around 15000 sheet/h. Non-stop and pre-stack feeding can improve work efficiency.
2.Overlapping Regulator: Adopts Servo system to control the overlapping that guarantee accurate and stable, and make sure the overlap error within 2mm.
3. Drying and Heating System: Bulk 800mm diameter drying roll, that could bring the highest glue drying effect, large heating roll by oil heating, guarantee the heating efficiency and make sure laminating quality when run in high speed.
4.Main Machine Body: Thicken machine wall (25mm thickness) enhances stability and for long time service life.
5. Two Rows Chain Driving System with Gear box: Special structure design in minimum transmission line, adopts two rows chain with gear box to drive the laminating unit to guarantee the high laminating speed with low noise.
6. Hydraulic Pressure System: The machine adopts hydraulic system to control the laminating pressure, the pressure would highly uniform and easy to adjust.
7.Man-Machine Interface System: Advanced 10inch color screen with PLC system makes the operation easy and convenient.
8.Flying Knife: Adopts imported ultrasonic probe with German chain, servo control system with high accuracy.
9. Anti-Curvature Device: Avoid paper curvature and make the paper smooth, especially for thin paper.
10. Corrugated Delivery: Better and easier for collecting paper.
11 Car Body: Whole machine cover adopts car body, glossy and wear-resisting.
12 Automatic Stacker: Fully automatic with sensor to rise and down the paper pile, heighten structure that can load paper pile height in 1060mm, side and front tidy devices to make sure paper pile collect well.
Detailed Photos
1. Automatic Feeder
We adopt offset feeder head (max speed 15000sheet/ hour), that makes the sheet feed more stable and smoother. The feeder is non-stop type with pre-stack guide device, which can keep the machine running when run out the paper pile. Taiwan vacuum pump guarantee the stable feeding.
2. Sheet Delivery Platform
Servo system to control the side lay and front lay connect with feeder in high precision, that guarantee the overlapping error within 2mm.
Moveable gear adjustment sheet deliver table that convenient for different sheet size
3. Laminating Unit
Heating roller by electromagnetic heating or oil heating, guarantee the prompt pre-heating and make the temperature to 180ºC and can keep constant temperature in high speed laminating.
Pressure rubber roller controlled by fully pneumatic system, the pressure would highly uniform and easy to adjust without bubbles,spots or wrinkle.
4. Drying system
Special design IR lamps set inside of drying roll, that make the glue drying fast but with low power consumption.
Blowing fans plus exhaust fan recycle the hot air and energy saving
Teflon coating surface to uniform the temperature and glue Sticking prevention that easy for cleaning and maintain
5. Film Unwinding
Install air shaft for film unwinding with auto tension controller. Special design for big diameter film roll and the roll can be adjusted to right and left.
6. Waste Film Slitting and Rewinding
Moveable waste film rewinding to modify the jumbo film width that can fit for paper sheet size
7. Disc Cutter with Pneumatic System
Multiple blades disc cutter for BOPP film with pneumatic sheet separating, that makes the laminated sheets without margin, and prepare for next process.
Two sheeting roll system can effectively sheet paper, special concave-convex roll make sheet smoothly and antislip.
8. Sand Wheel
Sand wheel instead of disc cutter for middle side film lamination, that prepare for pneumatic sheeting.
9. Flying Knife
We adopt big chain knife that it work in low rotate speed but with great line cutting speed
Imported German ultrasonic probe with German chain, servo control system with high accuracy.
Touch screen connect with PLC system that keep same step with main machine.
10. Two rows chain with gear box driving system
For the main laminating part adopts two rows chain with gear box driving system, that support machine run in high speed with high precision and low noise.
This structure also support machine run in long time but keep stability.
11. Pneumatic guiding system
Removable guide wheels with pneumatic system to adjust the pressure that easy to operate and maintain.
13. Corrugated Delivery
Corrugated delivery with conveyor belt that better and easier for collecting paper.
14 Automatic Stacker:
Full automatic with sensor to rise and down the paper pile
Heighten structure that can load paper pile height in 1060mm
Side and front tidy devices to make sure paper pile collect well.
14. Hydraulic lifting for loading film roll
15. Monitor Optional
COMPANY INTRODUCTION:
Ruian Gaoke Machinery Co., Ltd, was established in 2006. As a professional manufacturer, we not only do manufacturing, but also researching, marketing and offering after sales service. We supply quality equipments, effective and convenient solutions for cardboard box and corrugated box folding industry, printing and packaging industry.
OFFICE
FAQ
1.Q:Are you manufacturer?
A:Yes, we are folding gluing and window patching machine manufacturer with 10-year experience and profession.
2. Where is your company located? How can I visit there?
A:Our new factory address: No.18, Wansheng, Road, Wanquan Ind. Zone, Pingyang, Wenzhou, Zhejiang, China.
The nearest transportation center is Wenzhou Longwan airport or Ruian train station.
3.What's your advantages ?
_machines designed to quickly adjustable
_machines have good paper adaptability
_first-rate attractive and reasonable price
_rich experience and profession.
-double paper servo control
--Customers all over the world
--Certificate: CE certificate
--Fast reply:Our team will reply you soon.
-After sale service:We have a after sale department, service for your problems and dealing
with spare parts.
4.Q:What is the production time while placing order?
A:About 30 days
Our faith:
1) Society's Avail First
2) Client's Avail First
3) Employee's Avail First
4) Enterprise's Avail Second
If you have any inquiry, please don't hesitate to contact us. We will reply to youat the first time as we can.
){kind=link}
){kind=link}