Product Description
★ Equipped with high speed feeder, hi feeding accuracy and stability, fast adjustment and fit both thin and thick paper.
★ Cast iron feeding section wall plate ensure the feeding stable and accurate.
★ Integrated feeding wheel adjusting device.
★ Imported high-end stainless ensures a smooth conveyance.
★ Imported thin feeding belt, strong and durable.
★ Enhanced sprocket for grippers chains, ensure the high speed running.
★ Built-out delivery brush adjustment device ensures the convenient adjusting.
★ Blower controlling system ensures the paper can be neatly delivered under high speed condition.
★ Servo controlled ball screw pressure adjustment device.
★ Dual-channel lubrication system ensures the safety.
★ Synchronized belt driving system equipped with torque limiter.
★ Non-stop feeding device, pre-stacking-device and automatic non-stop device, shorten the preparing time and improve the efficiency.
★ Pressing case and plate design makes the makeready fast and convenient.
★ Front lay, side lay and speed fine tuning device ensures the stable conveyance and reduce the waste.
★ Touchscreen HMI, real-time monitoring the running condition ensures the adjustment and troubleshooting more convenient.
★ Input the parameters from the touch screen, automatic programming the auto-step, greatly save the foil.
★ 18 zones temperature controlling system, each zone can be adjusted separately.
Detailed Photos
1. Feeding section:
1.1 Hi-end imported feeder, 4 lift 4 forwarder,
the sucker can be adjusted according to
different paper, ensure smoothly feeding for
thin paper and thick paper.
1.2 Blower on both side for separating the paper.
1.3 Ductile iron wall plate.
1.4 Electromechanical double sheet detector.
1.5 Slope conveyer table, fit thin paper in high speed condition, fine tuning speed regulator can be no-stop adjusted..
1.6 Double side lay with photoelectric sensor.
1.7 Brush wheel and rubber wheel can be adjusted together, improve the efficiency.
1.8 Ultra anti-worn feeding rubber wheel.
1.9 Main/ auxiliary feeding non-stop switch.
1.10 Static electricity eliminator device, ensure the smoothly feeding.
2. Die cutting section:
2.1 Pressure bearing parts are enhanced high strength ductile iron QT500, high strength and never deform.
2.2 Special processed alloy crank shaft
2.3 Ultra anti-worn worm and worm gear.
2.4 Pneumatic clutch and SMC rotary joint imported from Japan
2.5 Oil and air pressure meter to monitor the oil pressure and air pressure, in case of low pressure, the machine will alarm and stop.
2.6 High accuracy intermittent box.
2.7 Die chase in position detector, improve the accuracy, pneumatic chase lock system, electrical pressure adjustment.
2.8 HRC50-53 die cutting plate.
2.9 Pre stretched imported gripper chain, improve the accuracy and stability, improve the accuracy and stability, special side positioning device ensure all the grippers are in one line
2.10 Ultra hard TI-AL alloy gripper bars.
3. Hot stamping section:
3.1 Input data in the industrial PC, the machine can automatically calculate the step distance, saving foil.
3.2 Imported servo motor and control system, feeding and collection of foil will be more convenient
3.3 Temperature of 18 heating zone can be adjust separately, can fit more complicated products.
3.4 Electrical pressure control system, when there is no paper in the punching section, there is no pressure.
3.5 Blower device to device the paper and foils.
3.6 Foil breaking detected system.
3.7 Inner and outer foil collection device.
3.8 Special material honeycomb plate, makes the make ready job more convenient.
4.Delviery section:
4.1 Automatic aligning device, blower in both side can ensure the thin and thick paper can be neatly delivered.
4.2 Touch screen monitor in delivery section indicates the necessary data, and be adjust by touching.
4.3 Photoelectric sensor ensures the neat delivery
4.4 Automatic delivery lift control system.
4.5 Automatic auxiliary delivery device.
4.6 Main chain protection device.
4.7 Delivery failure alarm.
4.8 Counter and note inserter.
4.9 Gripper bar tensioner
5.Stripping section:
5.1 The stripping section in combined with upper, middle, lower three frames.
The frames can be pulled out. It makes the adjustment more convenient and safe.
5.2 Stripping device can either be stripping pins or male/female plate
6. Optional pre make ready device.
Product Parameters
| Max sheet size: |
1050 x 750 mm |
| Min sheet size: |
400 x 370 mm |
| Max die cutting area: |
1040 x 720 mm |
| Die chase inner size |
1144 x 760 mm |
| Cutting plate size: |
1080 x 736 mm |
| Max stamping area: |
1020 x 720 mm |
| Min gripper margin: |
7 mm |
| Cutting precision: |
≤±0.1 mm |
| Stamping precision: |
≤±0.1 mm |
| Max cutting speed: |
300 T |
| Max cutting speed: |
7500 S/H |
| Max stamping speed: |
7000 S/H |
| Foil roll max diameter: |
Φ240 mm |
| Vertical foil width |
20~1260 mm |
| Horizon foil width: |
20~720 mm |
| Vertical foil axle: |
3 pcs |
| Horizon foil axle: |
2 pcs |
| Heating area: |
12 pcs |
| Temperature range: |
0~199ºC |
| Pre-stacking height: |
1500 mm |
| Delivery stack height: |
1400 mm |
| Application: |
Cardboard 0.1-2mm |
| Corrugated paper ≤4mm |
| Main motor power: |
11 KW |
| Heating area power: |
24 KW |
| Total power: |
60 KW |
| Dimension: |
5600(+1450)x2550(+2050)x2720 mm |
| Weight: |
18.5 T |
Company Profile
Ruian Gaoke Machinery Co., Ltd, was established in 2006. As a professional manufacturer, we not only do manufacturing, but also researching, marketing and offering after sales service. We supply quality equipments, effective and convenient solutions for cardboard box and corrugated box folding industry, printing and packaging industry.
We persist on business philosophy of technology and Innovation, casting quality and pursuit of excellence.
FAQ
1.Q:What is the machine warranty?
A:one year.
2.Q:Does your machine with CE certificate?
A:Yes.
3.Q:What is the production time while placing order?
A:About 30 days
4.Q:What is the delivery time?
A:Within 30 days after get the payment.
5.Q:Can your company handle shipping for customers?
A:Yes.(Please provide us your requested seaport and we can check the shipping charge
and arrange shipping for your order)
6.Q:Does the packing strong?
A:Yes, of course! All of our export packing is with strong wooden pallets, all are confirmed
to export packing standard.
7.Q:How about after-sales service process?
A:When your machine has problem, contact your sales and we will solve your problem as
soon as possible.
8.Q:Are you manufacturer?
A:Yes, we are manufacturer with 10-year experience and profession.
9.Q:Do you have stock product to sell?
A:Actually our machine need 20-30 days to manufacture, and there are many orders
from China and foreign countries, so we need custom one for you, and your order will
be highly attention to manufacture.
10.Q:Do you inspect the finished products?
A:Yes, we have QC department, they will inspect the machine before shipping, to
ensure there is nothing problem of the machine .
11.Q:What's the payment term?
A:T/T 30% in advance, the balance paid before delivery. We also accept payment via
West Union and L/C.
Audited Supplier 
★ Equipped with high speed feeder, hi feeding accuracy and stability, fast adjustment and fit both thin and thick paper.
){kind=link}
){kind=link}